Photorealistic Codec Avatars (PCA), which generate high-fidelity human face renderings, are increasingly being used in Virtual Reality (VR) environments to enable immersive communication and interaction through deep learning-based generative models. However, these models impose significant computational demands, making real-time inference challenging on resource-constrained VR devices such as head-mounted displays, where latency and power efficiency are critical. To address this challenge, we propose an efficient post-training quantization (PTQ) method tailored for Codec Avatar models, enabling low-precision execution without compromising output quality. In addition, we design a custom hardware accelerator that can be integrated into the system-on-chip of VR devices to further enhance processing efficiency. Building on these components, we introduce ESCA, a full-stack optimization framework that accelerates PCA inference on edge VR platforms. Experimental results demonstrate that ESCA boosts FovVideoVDP quality scores by up to $+0.39$ over the best 4-bit baseline, delivers up to $3.36\times$ latency reduction, and sustains a rendering rate of 100 frames per second in end-to-end tests, satisfying real-time VR requirements. These results demonstrate the feasibility of deploying high-fidelity codec avatars on resource-constrained devices, opening the door to more immersive and portable VR experiences.

The Low-Resource Audio Codec (LRAC) Challenge aims to advance neural audio coding for deployment in resource-constrained environments. The first edition focuses on low-resource neural speech codecs that must operate reliably under everyday noise and reverberation, while satisfying strict constraints on computational complexity, latency, and bitrate. Track 1 targets transparency codecs, which aim to preserve the perceptual transparency of input speech under mild noise and reverberation. Track 2 addresses enhancement codecs, which combine coding and compression with denoising and dereverberation. This paper presents the official baseline systems for both tracks in the 2025 LRAC Challenge. The baselines are convolutional neural codec models with Residual Vector Quantization, trained end-to-end using a combination of adversarial and reconstruction objectives. We detail the data filtering and augmentation strategies, model architectures, optimization procedures, and checkpoint selection criteria.

Transposed Convolutions (TCONV) enable the up-scaling mechanism within generative Artificial Intelligence (AI) models. However, the predominant Input-Oriented Mapping (IOM) method for implementing TCONV has complex output mapping, overlapping sums, and ineffectual computations. These inefficiencies further exacerbate the performance bottleneck of TCONV and generative models on resource-constrained edge devices. To address this problem, in this paper we propose MM2IM, a hardware-software co-designed accelerator that combines Matrix Multiplication (MatMul) with col2IM to process TCONV layers on resource-constrained edge devices efficiently. Using the SECDA-TFLite design toolkit, we implement MM2IM and evaluate its performance across 261 TCONV problem configurations, achieving an average speedup of 1.9x against a dual-thread ARM Neon optimized CPU baseline. We then evaluate the performance of MM2IM on a range of TCONV layers from well-known generative models achieving up to 4.2x speedup, and compare it against similar resource-constrained TCONV accelerators, outperforming them by at least 2x GOPs/DSP. Finally, we evaluate MM2IM on the DCGAN and pix2pix GAN models, achieving up to 3x speedup and 2.4x energy reduction against the CPU baseline.

Generative Adversarial Networks (GANs) are at the forefront of AI innovation, driving advancements in areas such as image synthesis, medical imaging, and data augmentation. However, the unique computational operations within GANs, such as transposed convolutions and instance normalization, introduce significant inefficiencies when executed on traditional electronic accelerators, resulting in high energy consumption and suboptimal performance. To address these challenges, we introduce PhotoGAN, the first silicon-photonic accelerator designed to handle the specialized operations of GAN models. By leveraging the inherent high throughput and energy efficiency of silicon photonics, PhotoGAN offers an innovative, reconfigurable architecture capable of accelerating transposed convolutions and other GAN-specific layers. The accelerator also incorporates a sparse computation optimization technique to reduce redundant operations, improving computational efficiency. Our experimental results demonstrate that PhotoGAN achieves at least 4.4x higher GOPS and 2.18x lower energy-per-bit (EPB) compared to state-of-the-art accelerators, including GPUs and TPUs. These findings showcase PhotoGAN as a promising solution for the next generation of GAN acceleration, providing substantial gains in both performance and energy efficiency.

Consumer electronics used to follow the miniaturization trend described by Moore's Law. Despite increased processing power in Microcontroller Units (MCUs), MCUs used in the smallest appliances are still not capable of running even moderately big, state-of-the-art artificial neural networks (ANNs) especially in time-sensitive scenarios. In this work, we present a novel method called Scattered Online Inference (SOI) that aims to reduce the computational complexity of ANNs. SOI leverages the continuity and seasonality of time-series data and model predictions, enabling extrapolation for processing speed improvements, particularly in deeper layers. By applying compression, SOI generates more general inner partial states of ANN, allowing skipping full model recalculation at each inference.

Recent advancements in single image super-resolution have been predominantly driven by token mixers and transformer architectures. WaveMixSR utilized the WaveMix architecture, employing a two-dimensional discrete wavelet transform for spatial token mixing, achieving superior performance in super-resolution tasks with remarkable resource efficiency. In this work, we present an enhanced version of the WaveMixSR architecture by (1) replacing the traditional transpose convolution layer with a pixel shuffle operation and (2) implementing a multistage design for higher resolution tasks ($4\times$). Our experiments demonstrate that our enhanced model -- WaveMixSR-V2 -- outperforms other architectures in multiple super-resolution tasks, achieving state-of-the-art for the BSD100 dataset, while also consuming fewer resources, exhibits higher parameter efficiency, lower latency and higher throughput. Our code is available at https://github.com/pranavphoenix/WaveMixSR.

Early infancy is a rapid and dynamic neurodevelopmental period for behavior and neurocognition. Longitudinal magnetic resonance imaging (MRI) is an effective tool to investigate such a crucial stage by capturing the developmental trajectories of the brain structures. However, longitudinal MRI acquisition always meets a serious data-missing problem due to participant dropout and failed scans, making longitudinal infant brain atlas construction and developmental trajectory delineation quite challenging. Thanks to the development of an AI-based generative model, neuroimage completion has become a powerful technique to retain as much available data as possible. However, current image completion methods usually suffer from inconsistency within each individual subject in the time dimension, compromising the overall quality. To solve this problem, our paper proposed a two-stage cascaded diffusion model, Cas-DiffCom, for dense and longitudinal 3D infant brain MRI completion and super-resolution. We applied our proposed method to the Baby Connectome Project (BCP) dataset. The experiment results validate that Cas-DiffCom achieves both individual consistency and high fidelity in longitudinal infant brain image completion. We further applied the generated infant brain images to two downstream tasks, brain tissue segmentation and developmental trajectory delineation, to declare its task-oriented potential in the neuroscience field.

Recent advancements in neural vocoding are predominantly driven by Generative Adversarial Networks (GANs) operating in the time-domain. While effective, this approach neglects the inductive bias offered by time-frequency representations, resulting in reduntant and computionally-intensive upsampling operations. Fourier-based time-frequency representation is an appealing alternative, aligning more accurately with human auditory perception, and benefitting from well-established fast algorithms for its computation. Nevertheless, direct reconstruction of complex-valued spectrograms has been historically problematic, primarily due to phase recovery issues. This study seeks to close this gap by presenting Vocos, a new model that directly generates Fourier spectral coefficients. Vocos not only matches the state-of-the-art in audio quality, as demonstrated in our evaluations, but it also substantially improves computational efficiency, achieving an order of magnitude increase in speed compared to prevailing time-domain neural vocoding approaches. The source code and model weights have been open-sourced at https://github.com/charactr-platform/vocos.

Transposed convolution is crucial for generating high-resolution outputs, yet has received little attention compared to convolution layers. In this work we revisit transposed convolution and introduce a novel layer that allows us to place information in the image selectively and choose the `stroke breadth' at which the image is synthesized, whilst incurring a small additional parameter cost. For this we introduce three ideas: firstly, we regress offsets to the positions where the transpose convolution results are placed; secondly we broadcast the offset weight locations over a learnable neighborhood; and thirdly we use a compact parametrization to share weights and restrict offsets. We show that simply substituting upsampling operators with our novel layer produces substantial improvements across tasks as diverse as instance segmentation, object detection, semantic segmentation, generative image modeling, and 3D magnetic resonance image enhancement, while outperforming all existing variants of transposed convolutions. Our novel layer can be used as a drop-in replacement for 2D and 3D upsampling operators and the code will be publicly available.

Data Scientists use Generative Adversarial Networks (GANs) for a wide range of tasks, with image generation being one of the most common. A particular type of GAN known as DCGAN (Deep Convolutional GAN) has been created specifically for this. In this article, I will explain DCGANs and show you how to build one in Python using Keras/Tensorflow libraries. Then, we will use it to generate images of bonsai trees. Similarities exist between Machine Learning algorithms that enable us to categorise them based on architecture and use cases.